Changes In 2018

Use navigation keys to see the changes in other years.

21 December, 2018

Released version 3.03.05 of the SB-Assembler.

16 November, 2018

Created a short, quick project about connecting an old Voltcraft multi meter to a USB serial port.

26 September, 2018

Released another version of the SB-Assembler, adding a negation operator for expressions.

16 September, 2018

Released software version V1.1 for my SB-6668 counter, fixing a hardware timing issue and adding two new SB-Bus commands as a bonus.

7 September, 2018

Added a how-to write to Apple binary files at the end of the page for the .TF directive.

6 Septebmer, 2018

Released another version of the SB-Assembler with the MOS Technology file format as extra feature. And I have put the SB-Assembler on Github with the purpose of getting some more attention.

19 June, 2018

Updated the VLAN enabled Raspberry Pi article to reflect modern procedures.

17 May, 2018

Added a review of my Chinese AVR programmer which did not work out of the box.

11 May, 2018

Added the IR-Repeater project.

27 April, 2018

Released my Raspberry Pi controlled Eprom Emulator.

18 February, 2018

SB-Assember V3.03.00 released, intruducing the RCA 1802 processor and the .RU directive.

20 January, 2018

Fluke 80T-150 temperature to voltage converter revival page added.

16 January, 2018

Added a review of my NASDock V1.2 form Friendlyarm.

13 January, 2018

A small project which adds a delay timer to an Ikea Striberg wardrobe LED strip in order to make the sensor less nervous when someone is standing in front of the wardrobe.